Loads take longer
A cycle that used to be enough now needs a second, or clothes come out still damp at the edges.
Dryer vent cleaning
The lint you cannot reach is the part that matters.
Professional vent clearing across Los Angeles County. Better airflow, lower fire risk and a dryer that stops taking three cycles to do one load.
- Removes the buildup a lint trap never catches
- Recommended once a year for safety
- Backed by our 100% satisfaction guarantee
The short answer
Why is my dryer taking two or three cycles?
Almost always because the air cannot get out. A dryer works by pushing hot, wet air through a duct to the outside of the building. The lint trap catches what it can, but the fine lint that gets past it settles along the duct run, and it keeps settling. As that layer thickens the duct narrows, the moist air backs up, and the machine runs longer and hotter to shift the same load.
That is why the symptoms arrive together: clothes still damp at the end of a cycle, a laundry room that feels humid, the outside of the dryer hot to the touch, and a bill that has crept up. It is also the fire risk everyone mentions, because the lint sitting in that duct is dry, warm and directly in the path of the heat. Clearing the run restores the airflow the machine was designed around, which is why a single load starts finishing in a single cycle again.
How we do it
What a vent cleaning actually involves
Inspect the run
We find where the duct goes, how long it is and how many turns it takes. A short straight run and a long one through a ceiling are different jobs.
Clear the duct
Rotating brushes work the full length of the run while a vacuum holds the loosened lint, so what comes off the walls leaves the building instead of your laundry room.
Check the exterior vent
The outside flap is where buildup and nesting usually collect. If it is blocked or stuck the duct behind it will fill again within months.
Confirm the airflow
We run the dryer and check that the air is moving properly at the outlet before we pack up, and we show you the difference.
Worth booking if
Signs your vent needs clearing
Any one of these on its own is worth a look. Two or more together usually means the run is well on its way to blocked.
The room feels humid
Moisture that should be leaving through the duct is ending up in the laundry room instead.
The dryer runs hot
The casing or the clothes are hot to the touch at the end of a cycle, which is the airflow problem showing itself.
A burning smell
Any hint of hot lint is a reason to stop using the dryer and have the run checked before the next load.
It has been over a year
Annual clearing is the standard recommendation, and households with pets or heavy laundry reach that point sooner.
The outside flap is stuck
If the exterior vent no longer opens fully when the dryer runs, the duct behind it is already restricted.
Common questions
Before you book
How often should a dryer vent be cleaned?
Once a year is the general recommendation. Households doing a lot of laundry, or with pets that shed, tend to need it sooner. We will tell you honestly at the inspection whether yours needed doing.
How long does it take?
A typical residential run is done within an hour. Long runs, roof vents and awkward access take longer, and we will tell you before we start rather than after.
Can you reach a vent that exits through the roof?
Usually yes. Tell us where the vent comes out when you call so we bring the right equipment on the first visit.
Do you clean the dryer itself?
We clear the vent run and the exterior outlet, and we check the connection at the back of the machine. Internal appliance repair is a job for an appliance technician.
Talk to a person
Get a free estimate today
Tell us where the vent runs and how the dryer has been behaving. We will tell you what the job involves and what it costs.
(844) 966-2005- Free estimate and inspection before any work
- Weekend appointments available
- 100% satisfaction guarantee on every job
- Serving all of Los Angeles County